Stop KM/Mile Freezer for AUDI Q8 4M F1 & E/G TRON

Stop KM/Mile Freezer for AUDI Q8 4M F1 & E/G TRON

0 out of 5

£150.00£190.00 +VAT

“With working speed indicator”, where the speed is always shown in the speedometer (All assistance systems work permanently).


The module does not have to be reactivated every time you start your journey. The last set mode is remembered when you start again.


(The Stop KM Freezer is Intended for off-road, dyno testing and research purposes)

SKU: 10021 Categories: , ,
Clear
  • Description
  • Additional information

Description

Audi Q8 4M F1 & E/G TRON

 

Stop KM blocker – Can Blocker for Audi Q8 4M F1 & E/G TRON

The option “without working speed indicator” does not show the speed, the speed display ONLY works in the HUD display (assistance systems do not work).

 

Or you can select the option “with working speed indicator”, where the speed is always shown in the speedometer (All assistance systems work permanently).

 

The module does not have to be reactivated every time you start your journey. The last set mode is memorised when you restart the car.

 

Audi Q8 4M F1 & E/G TRON odometer blocker/mileage filter

Mileage Stopper – Speedometer Stopper – Speed ​​Filter – Mileage Blocker – Mileage Stop – Can Emulator – Can Blocker

The right module for the Audi Q8 4M F1 & E/G TRON


❎ Speedometer with working speed indicator:

The activation of the speedometer with a functioning speed display in the Audi Q8 4M F1 & E/G TRONwith a virtual cockpit or normal speedometer is done by pressing the OK button for 10 seconds, which is located on the steering wheel. 

Press the Ok button for 10 seconds → Mode 1. Press the Ok button for 10 seconds → Mode 2. Press the Ok button for 10 seconds → Mode 3. Press the Ok button for 10 seconds → Mode 4.

❎ Functional sequence:

Mode 1: The actual speed is displayed permanently – only 0% of the actually driven distance is counted. From 100 Miles/Km, only 0 Miles/Km is counted.

(For this you have to activate Mode 1. and then park/turn off the car for 4 minutes)

Mode 2: The actual speed is displayed permanently – only 5% of the actually driven distance is counted. From 100 Miles/Km, only 5 Miles/Km is counted.

Mode 3: The actual speed is displayed permanently – only 10% of the actually driven distance is counted.From 100 Miles/Km, only 5 Miles/Km is counted.

Mode 4: Everything back to the original mileage counting ✅

Percentages of the kilometer/mileage count can vary by a few percent in Mode 3, is dependent on the year of construction and tire size. (+ – 3 to 5%)

❗️ In each mode, all assistance systems function properly ❗️


❎ Activation of the KM Freezer for Audi Q8 4M F1 & E/G TRON without a functioning speed display is done in this way:

Mode 1

Simultaneously press the return button ↩️ on the steering wheel and the arrow key to the left ◀️
the kilometres/miles are not recorded.
The Km/h speedometer always works up to a speed of 20 km/h.
Above 20 km/h the speedometer works for 10 seconds. (Acceleration phase)
After 10 seconds, the Km/h speedometer stops and drops to zero.
If you come to a standstill or a speed below 20 km/h, the correct speed will be displayed again for 10 seconds.
✅ The head-up display always shows the actual speed ✅

Mode 2

If you simultaneously press the return button ↩️ on the steering wheel and the arrow key to the right,
Only half of the kilometres driven will be recorded. (50%)
The tachometer in this mode works continuously but displays half the actual speed.
✅ The head-up display always shows the actual speed ✅

Mode Normal

Simultaneously press the return button ↩️ on the steering wheel and the ok button
The kilometres are recorded completely and everything works as usual.

The right module for the Audi Q8 4M F1 & E/G TRON

Originals & High-quality processing of the plug-in system

All functions work with the speedometer module

Plug & Play plug-in system with connections.

No soldering or cutting of cables or electronic components required

The ultimate solution to block the mileage for all ECUs in the vehicle

  1. Easy and fast installation. ✅
  2. Disassemble the odometer and disconnect it. Then connect the kilometre filter with the plug connection. ✅
  3. The installation does not require cutting or soldering of cables.
  4. It is activated by pressing a button on the steering wheel. ✅
  5. No error messages in the speedometer or navigation ✅
  6. Cruise control continues to function without exception ✅
  7. Other functions are fully usable ✅
  8. No error messages in the dashboard ✅
  9. The confirmation of the activation takes place in the speedometer by the turn signal flashes ✅

The KM Freezer always saves the last setting. Nothing has to be reset every time you start your journey. Activation and deactivation can take place at any time, both while driving and while stationary.

 

 (The Stop KM Freezer is Intended for off-road, dyno testing and research purposes.)

 

If you buy 2 or more of any variations of our Stop KM

Freezers you can obtain a 10% discount. 

At check out enter the coupon code shown below. 

If you buy 5 or more of any variations of our Stop KM

Freezers you can obtain a 15% discount. 

At check out enter the coupon code shown below. 

 

Additional information

Weight 0.025 kg
Model

Audi Q8 4M F1, Audi E-Tron, Audi G-Tron

Year

2018, 2019, 2020, 2021

Choose an option

With Working Speed Indicator, Without Working Speed Indicator

SPEEDOMETER / SEE PICTURE

With Temperature/Fuel Gauge, Without Temperature/Fuel Gauge

You've just added this product to the cart:

Product Enquiry

WhatsApp chat